Default FTP Active Directory User Isolation Settings <activeDirectory>

The <activeDirectory> element specifies the credentials and connection time-out for communicating with an Active Directory server for FTP user isolation. This option is the same as choosing Active Directory user isolation in the IIS 6.0 FTP server, where a user's account must have the msIIS-FTPRoot and msIIS-FTPDir properties configured in their Active Directory objects.

• If the FTP service successfully accesses the path that is specified by the msIIS-FTPRoot and msIIS-FTPDir properties, it becomes the home directory for the user and the user cannot access the file system outside this directory. - If the FTP service cannot access the path that is specified by the msIIS-FTPRoot and msIIS-FTPDir properties, or either of the msIIS-FTPRoot or msIIS-FTPDir properties do not exist, the user is denied access.

For additional information about how to configure the Active Director properties, see the "Isolate Users Using Active Directory Mode" section in the Hosting Multiple FTP Sites with FTP User Isolation (IIS 6.0) topic.

With Windows 7 and Windows Server 2008 R2, the FTP 7.5 service ships as a feature for IIS 7.5, so downloading the FTP service is no longer necessary.

To support FTP publishing for your Web server, you must install the FTP service. To do so, use the following steps.

1. On the taskbar, click Server Manager.

2. In Server Manager, click the Manage menu, and then click Add Roles and Features.

3. In the Add Roles and Features wizard, click Next. Select the installation type and click Next. Select the destination server and click Next.

4. On the Server Roles page, expand Web Server (IIS), and then select FTP Server.

   Note

   To support ASP.Membership authentication or IIS Manager authentication for the FTP service, you will need to select FTP Extensibility, in addition to FTP Service.
   .

5. Click Next, and then on the Select features page, click Next again.

6. On the Confirm installation selections page, click Install.

7. On the Results page, click Close.

1. On the Start screen, move the pointer all the way to the lower left corner, right-click the Start button, and then click Control Panel.

2. In Control Panel, click Programs and Features, and then click Turn Windows features on or off.

3. Expand Internet Information Services, and then select FTP Server.

   Note

   To support ASP.Membership authentication or IIS Manager authentication for the FTP service, you will also need to select FTP Extensibility.
   

4. Click OK.

5. Click Close.

1. On the taskbar, click Start, point to Administrative Tools, and then click Server Manager.

2. In the Server Manager hierarchy pane, expand Roles, and then click Web Server (IIS).

3. In the Web Server (IIS) pane, scroll to the Role Services section, and then click Add Role Services.

4. On the Select Role Services page of the Add Role Services Wizard, expand FTP Server.

5. Select FTP Service.

   Note

   To support ASP.Membership authentication or IIS Manager authentication for the FTP service, you will also need to select FTP Extensibility.
   

6. Click Next.

7. On the Confirm Installation Selections page, click Install.

8. On the Results page, click Close.

1. On the taskbar, click Start, and then click Control Panel.

2. In Control Panel, click Programs and Features, and then click Turn Windows Features on or off.

3. Expand Internet Information Services, and then FTP Server.

4. Select FTP Service.

   Note

   To support ASP.Membership authentication or IIS Manager authentication for the FTP service, you will also need to select FTP Extensibility.
   

5. Click OK.

1. Download the installation package from the following URL:

   • https://www.iis.net/expand/FTP

2. Follow the instructions in the following walkthrough to install the FTP service:

   • Installing and Troubleshooting FTP 7

1. Open Internet Information Services (IIS) Manager:

   • If you are using Windows Server 2012 or Windows Server 2012 R2:

     • On the taskbar, click Server Manager, click Tools, and then click Internet Information Services (IIS) Manager.

   • If you are using Windows 8 or Windows 8.1:

     • Hold down the Windows key, press the letter X, and then click Control Panel.
     • Click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

   • If you are using Windows Server 2008 or Windows Server 2008 R2:

     • On the taskbar, click Start, point to Administrative Tools, and then click Internet Information Services (IIS) Manager.

   • If you are using Windows Vista or Windows 7:

     • On the taskbar, click Start, and then click Control Panel.
     • Double-click Administrative Tools, and then double-click Internet Information Services (IIS) Manager.

2. In the Connections pane, expand the server name, expand the Sites node, and then click the name of the site.

3. In the site's Home pane, double-click FTP User Isolation.
   

4. On the FTP User Isolation page, under Isolate users. Restrict users to the following directory:, select FTP home directory configured in Active Directory and then click Set.
   

5. In the Set Credentials dialog box, enter a user name and password in the User name and Password boxes. Enter the password again in the Confirm Password box, and then click OK.

6. In the Actions pane, click Apply.

For additional information about how to set up the Active Directory, see the "Isolate Users Using Active Directory Mode" section in the Hosting Multiple FTP Sites with FTP User Isolation (IIS 6.0) topic.

The <activeDirectory> element is configured at the site level.

None.

The following configuration sample displays an example <siteDefaults> element for a server that defines several of the FTP site defaults.

<siteDefaults>
   <logFile logFormat="W3C" directory="%SystemDrive%\inetpub\logs\LogFiles" />
   <traceFailedRequestsLogging enabled="true" directory="%SystemDrive%\inetpub\logs\FailedReqLogFiles" />
   <ftpServer serverAutoStart="true">
      <connections controlChannelTimeout="300" />
      <security>
         <commandFiltering>
            <add command="SYST" allowed="false" />
         </commandFiltering>
         <ssl serverCertHash="57686f6120447564652c2049495320526f636b73" controlChannelPolicy="SslAllow" dataChannelPolicy="SslAllow" />
         <sslClientCertificates clientCertificatePolicy="CertIgnore" />
         <authentication>
             <anonymousAuthentication enabled="false" />
             <basicAuthentication enabled="false" />
             <clientCertAuthentication enabled="false" />
             <customAuthentication>
                <providers>
                   <add name="FtpCustomAuthenticationModule" enabled="false" />
                </providers>
             </customAuthentication>
         </authentication>
      </security>
      <messages bannerMessage="Welcome!" allowLocalDetailedErrors="true" />
      <fileHandling keepPartialUploads="false" />
      <firewallSupport externalIp4Address="169.254.10.10" />
      <userIsolation mode="None" />
      <directoryBrowse showFlags="StyleUnix, DisplayAvailableBytes" />
      <logFile period="Daily" enabled="true" />
   </ftpServer>
</siteDefaults>

The following code samples illustrate setting several of the FTP site defaults.

REM Configure FTP sites to start automatically by default.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.serverAutoStart:"True" /commit:apphost

REM Configure the default control channel time-out for 300 seconds.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.connections.controlChannelTimeout:"300" /commit:apphost

REM Configure the default FTP security options.
appcmd.exe set config -section:system.applicationHost/sites /+"siteDefaults.ftpServer.security.commandFiltering.[command='SYST',allowed='False']" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.ssl.controlChannelPolicy:"SslAllow" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.ssl.dataChannelPolicy:"SslAllow" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.ssl.serverCertHash:"57686f6120447564652c2049495320526f636b73" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.authentication.anonymousAuthentication.enabled:"False" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.authentication.basicAuthentication.enabled:"False" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.authentication.clientCertAuthentication.enabled:"False" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.security.sslClientCertificates.clientCertificatePolicy:"CertIgnore" /commit:apphost
appcmd.exe set config -section:system.applicationHost/sites /+"siteDefaults.ftpServer.security.authentication.customAuthentication.providers.[name='FtpCustomAuthenticationModule',enabled='False']" /commit:apphost

REM Configure a custom default banner message and local detailed error messages.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.messages.bannerMessage:"Welcome!" /siteDefaults.ftpServer.messages.allowLocalDetailedErrors:"True" /commit:apphost

REM Configure the FTP service to keep partially-uploaded files by default.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.fileHandling.keepPartialUploads:"False" /commit:apphost

REM Configure the default external IP address of a firewall.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.firewallSupport.externalIp4Address:"169.254.10.10" /commit:apphost

REM Specify no user isolation by default.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.userIsolation.mode:"None" /commit:apphost

REM Configure UNIX-style directory listings by default and display the available drive space.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.directoryBrowse.showFlags:"StyleUnix, DisplayAvailableBytes" /commit:apphost

REM Enable logging by default with daily log file rollover.
appcmd.exe set config -section:system.applicationHost/sites /siteDefaults.ftpServer.logFile.period:"Daily" /siteDefaults.ftpServer.logFile.enabled:"True" /commit:apphost

using System;
using System.Text;
using Microsoft.Web.Administration;

internal static class Sample
{
   private static void Main()
   {
      using (ServerManager serverManager = new ServerManager())
      {
         Configuration config = serverManager.GetApplicationHostConfiguration();
         ConfigurationSection sitesSection = config.GetSection("system.applicationHost/sites");
         ConfigurationElement siteDefaultsElement = sitesSection.GetChildElement("siteDefaults");
         ConfigurationElement ftpServerElement = siteDefaultsElement.GetChildElement("ftpServer");

         // Configure FTP sites to start automatically by default.
         ftpServerElement["serverAutoStart"] = true;

         // Configure the default control channel time-out for 300 seconds.
         ConfigurationElement connectionsElement = ftpServerElement.GetChildElement("connections");
            connectionsElement["controlChannelTimeout"] = 300;

         // Configure the default FTP security options.
         ConfigurationElement securityElement = ftpServerElement.GetChildElement("security");
         ConfigurationElement commandFilteringElement = securityElement.GetChildElement("commandFiltering");
         ConfigurationElementCollection commandFilteringCollection = commandFilteringElement.GetCollection();
         ConfigurationElement addElement = commandFilteringCollection.CreateElement("add");
            addElement["command"] = @"SYST";
            addElement["allowed"] = false;
            commandFilteringCollection.Add(addElement);
         ConfigurationElement sslElement = securityElement.GetChildElement("ssl");
            sslElement["controlChannelPolicy"] = @"SslAllow";
            sslElement["dataChannelPolicy"] = @"SslAllow";
            sslElement["serverCertHash"] = "57686f6120447564652c2049495320526f636b73";
         ConfigurationElement authenticationElement = securityElement.GetChildElement("authentication");
         ConfigurationElement anonymousAuthenticationElement = authenticationElement.GetChildElement("anonymousAuthentication");
            anonymousAuthenticationElement["enabled"] = false;
         ConfigurationElement basicAuthenticationElement = authenticationElement.GetChildElement("basicAuthentication");
            basicAuthenticationElement["enabled"] = false;
         ConfigurationElement clientCertAuthenticationElement = authenticationElement.GetChildElement("clientCertAuthentication");
            clientCertAuthenticationElement["enabled"] = false;
         ConfigurationElement sslClientCertificatesElement = securityElement.GetChildElement("sslClientCertificates");
            sslClientCertificatesElement["clientCertificatePolicy"] = @"CertIgnore";
         ConfigurationElement customAuthenticationElement = authenticationElement.GetChildElement("customAuthentication");
         ConfigurationElementCollection providersCollection = customAuthenticationElement.GetCollection("providers");
         ConfigurationElement addElement1 = providersCollection.CreateElement("add");
            addElement1["name"] = @"FtpCustomAuthenticationModule";
            addElement1["enabled"] = false;
            providersCollection.Add(addElement1);

         // Configure a custom default banner message and local detailed error messages.
         ConfigurationElement messagesElement = ftpServerElement.GetChildElement("messages");
            messagesElement["bannerMessage"] = @"Welcome!";
            messagesElement["allowLocalDetailedErrors"] = true;

         // Configure the FTP service to keep partially-uploaded files by default.
         ConfigurationElement fileHandlingElement = ftpServerElement.GetChildElement("fileHandling");
           fileHandlingElement["keepPartialUploads"] = false;

         // Configure the default external IP address of a firewall.
         ConfigurationElement firewallSupportElement = ftpServerElement.GetChildElement("firewallSupport");
            firewallSupportElement["externalIp4Address"] = @"169.254.10.10";

         // Specify no user isolation by default.
         ConfigurationElement userIsolationElement = ftpServerElement.GetChildElement("userIsolation");
            userIsolationElement["mode"] = @"None";

         // Configure UNIX-style directory listings by default and display the available drive space.
         ConfigurationElement directoryBrowseElement = ftpServerElement.GetChildElement("directoryBrowse");
            directoryBrowseElement["showFlags"] = @"StyleUnix, DisplayAvailableBytes";

         // Enable logging by default with daily log file rollover.
         ConfigurationElement logFileElement = ftpServerElement.GetChildElement("logFile");
            logFileElement["period"] = @"Daily";
            logFileElement["enabled"] = true;

         serverManager.CommitChanges();
      }
   }
}

Imports System
Imports System.Text
Imports Microsoft.Web.Administration

Module Sample
   Sub Main()
      Dim serverManager As ServerManager = New ServerManager
      Dim config As Configuration = serverManager.GetApplicationHostConfiguration
      Dim sitesSection As ConfigurationSection = config.GetSection("system.applicationHost/sites")
      Dim siteDefaultsElement As ConfigurationElement = sitesSection.GetChildElement("siteDefaults")
      Dim ftpServerElement As ConfigurationElement = siteDefaultsElement.GetChildElement("ftpServer")

      ' Configure FTP sites to start automatically by default.
      ftpServerElement("serverAutoStart") = True

      ' Configure the default control channel time-out for 300 seconds.
      Dim connectionsElement As ConfigurationElement = ftpServerElement.GetChildElement("connections")
         connectionsElement("controlChannelTimeout") = 300

      ' Configure the default FTP security options.
      Dim securityElement As ConfigurationElement = ftpServerElement.GetChildElement("security")
      Dim commandFilteringElement As ConfigurationElement = securityElement.GetChildElement("commandFiltering")
      Dim commandFilteringCollection As ConfigurationElementCollection = commandFilteringElement.GetCollection
      Dim addElement As ConfigurationElement = commandFilteringCollection.CreateElement("add")
         addElement("command") = "SYST"
         addElement("allowed") = False
         commandFilteringCollection.Add(addElement)
      Dim sslElement As ConfigurationElement = securityElement.GetChildElement("ssl")
         sslElement("controlChannelPolicy") = "SslAllow"
         sslElement("dataChannelPolicy") = "SslAllow"
         sslElement("serverCertHash") = "57686f6120447564652c2049495320526f636b73"
      Dim authenticationElement As ConfigurationElement = securityElement.GetChildElement("authentication")
      Dim anonymousAuthenticationElement As ConfigurationElement = authenticationElement.GetChildElement("anonymousAuthentication")
         anonymousAuthenticationElement("enabled") = False
      Dim basicAuthenticationElement As ConfigurationElement = authenticationElement.GetChildElement("basicAuthentication")
         basicAuthenticationElement("enabled") = False
      Dim clientCertAuthenticationElement As ConfigurationElement = authenticationElement.GetChildElement("clientCertAuthentication")
         clientCertAuthenticationElement("enabled") = False
      Dim sslClientCertificatesElement As ConfigurationElement = securityElement.GetChildElement("sslClientCertificates")
         sslClientCertificatesElement("clientCertificatePolicy") = "CertIgnore"
      Dim customAuthenticationElement As ConfigurationElement = authenticationElement.GetChildElement("customAuthentication")
      Dim providersCollection As ConfigurationElementCollection = customAuthenticationElement.GetCollection("providers")
      Dim addElement1 As ConfigurationElement = providersCollection.CreateElement("add")
         addElement1("name") = "FtpCustomAuthenticationModule"
         addElement1("enabled") = False
         providersCollection.Add(addElement1)

      ' Configure a custom default banner message and local detailed error messages.
      Dim messagesElement As ConfigurationElement = ftpServerElement.GetChildElement("messages")
         messagesElement("bannerMessage") = "Welcome!"
         messagesElement("allowLocalDetailedErrors") = True

      ' Configure the FTP service to keep partially-uploaded files by default.
      Dim fileHandlingElement As ConfigurationElement = ftpServerElement.GetChildElement("fileHandling")
         fileHandlingElement("keepPartialUploads") = False

      ' Configure the default external IP address of a firewall.
      Dim firewallSupportElement As ConfigurationElement = ftpServerElement.GetChildElement("firewallSupport")
         firewallSupportElement("externalIp4Address") = "169.254.10.10"

      ' Specify no user isolation by default.
      Dim userIsolationElement As ConfigurationElement = ftpServerElement.GetChildElement("userIsolation")
         userIsolationElement("mode") = "None"

      ' Configure UNIX-style directory listings by default and display the available drive space.
      Dim directoryBrowseElement As ConfigurationElement = ftpServerElement.GetChildElement("directoryBrowse")
         directoryBrowseElement("showFlags") = "StyleUnix, DisplayAvailableBytes"

      ' Enable logging by default with daily log file rollover.
      Dim logFileElement As ConfigurationElement = ftpServerElement.GetChildElement("logFile")
         logFileElement("period") = "Daily"
         logFileElement("enabled") = True

      serverManager.CommitChanges()
   End Sub

End Module

var adminManager = new ActiveXObject('Microsoft.ApplicationHost.WritableAdminManager');
adminManager.CommitPath = "MACHINE/WEBROOT/APPHOST";

var sitesSection = adminManager.GetAdminSection("system.applicationHost/sites", "MACHINE/WEBROOT/APPHOST");
var siteDefaultsElement = sitesSection.ChildElements.Item("siteDefaults");
var ftpServerElement = siteDefaultsElement.ChildElements.Item("ftpServer");

// Configure FTP sites to start automatically by default.
ftpServerElement.Properties.Item("serverAutoStart").Value = true;

// Configure the default control channel time-out for 300 seconds.
var connectionsElement = ftpServerElement.ChildElements.Item("connections");
   connectionsElement.Properties.Item("controlChannelTimeout").Value = 300;

// Configure the default FTP security options.
var securityElement = ftpServerElement.ChildElements.Item("security");
var commandFilteringElement = securityElement.ChildElements.Item("commandFiltering");
var commandFilteringCollection = commandFilteringElement.Collection;
var addElement = commandFilteringCollection.CreateNewElement("add");
   addElement.Properties.Item("command").Value = "SYST";
   addElement.Properties.Item("allowed").Value = false;
   commandFilteringCollection.AddElement(addElement);
var sslElement = securityElement.ChildElements.Item("ssl");
   sslElement.Properties.Item("controlChannelPolicy").Value = "SslAllow";
   sslElement.Properties.Item("dataChannelPolicy").Value = "SslAllow";
   sslElement.Properties.Item("serverCertHash").Value = "57686f6120447564652c2049495320526f636b73";
var authenticationElement = securityElement.ChildElements.Item("authentication");
var anonymousAuthenticationElement = authenticationElement.ChildElements.Item("anonymousAuthentication");
   anonymousAuthenticationElement.Properties.Item("enabled").Value = false;
var basicAuthenticationElement = authenticationElement.ChildElements.Item("basicAuthentication");
   basicAuthenticationElement.Properties.Item("enabled").Value = false;
var clientCertAuthenticationElement = authenticationElement.ChildElements.Item("clientCertAuthentication");
   clientCertAuthenticationElement.Properties.Item("enabled").Value = false;
var sslClientCertificatesElement = securityElement.ChildElements.Item("sslClientCertificates");
    sslClientCertificatesElement.Properties.Item("clientCertificatePolicy").Value = "CertIgnore";
var customAuthenticationElement = authenticationElement.ChildElements.Item("customAuthentication");
var providersCollection = customAuthenticationElement.ChildElements.Item("providers").Collection;
var addElement1 = providersCollection.CreateNewElement("add");
   addElement1.Properties.Item("name").Value = "FtpCustomAuthenticationModule";
   addElement1.Properties.Item("enabled").Value = false;
   providersCollection.AddElement(addElement1);

// Configure a custom default banner message and local detailed error messages.
var messagesElement = ftpServerElement.ChildElements.Item("messages");
   messagesElement.Properties.Item("bannerMessage").Value = "Welcome!";
   messagesElement.Properties.Item("allowLocalDetailedErrors").Value = true;

// Configure the FTP service to keep partially-uploaded files by default.
var fileHandlingElement = ftpServerElement.ChildElements.Item("fileHandling");
   fileHandlingElement.Properties.Item("keepPartialUploads").Value = false;

// Configure the default external IP address of a firewall.
var firewallSupportElement = ftpServerElement.ChildElements.Item("firewallSupport");
   firewallSupportElement.Properties.Item("externalIp4Address").Value = "169.254.10.10";

// Specify no user isolation by default.
var userIsolationElement = ftpServerElement.ChildElements.Item("userIsolation");
   userIsolationElement.Properties.Item("mode").Value = "None";

// Configure UNIX-style directory listings by default and display the available drive space.
var directoryBrowseElement = ftpServerElement.ChildElements.Item("directoryBrowse");
   directoryBrowseElement.Properties.Item("showFlags").Value = "StyleUnix, DisplayAvailableBytes";

// Enable logging by default with daily log file rollover.
var logFileElement = ftpServerElement.ChildElements.Item("logFile");
   logFileElement.Properties.Item("period").Value = "Daily";
   logFileElement.Properties.Item("enabled").Value = true;

adminManager.CommitChanges();

Set adminManager = createObject("Microsoft.ApplicationHost.WritableAdminManager")
adminManager.CommitPath = "MACHINE/WEBROOT/APPHOST"
Set sitesSection = adminManager.GetAdminSection("system.applicationHost/sites", "MACHINE/WEBROOT/APPHOST")
Set siteDefaultsElement = sitesSection.ChildElements.Item("siteDefaults")
Set ftpServerElement = siteDefaultsElement.ChildElements.Item("ftpServer")

' Configure FTP sites to start automatically by default.
ftpServerElement.Properties.Item("serverAutoStart").Value = True

' Configure the default control channel time-out for 300 seconds.
Set connectionsElement = ftpServerElement.ChildElements.Item("connections")
   connectionsElement.Properties.Item("controlChannelTimeout").Value = 300

' Configure the default FTP security options.
Set securityElement = ftpServerElement.ChildElements.Item("security")
Set commandFilteringElement = securityElement.ChildElements.Item("commandFiltering")
Set commandFilteringCollection = commandFilteringElement.Collection
Set addElement = commandFilteringCollection.CreateNewElement("add")
   addElement.Properties.Item("command").Value = "SYST"
   addElement.Properties.Item("allowed").Value = False
   commandFilteringCollection.AddElement(addElement)
Set sslElement = securityElement.ChildElements.Item("ssl")
   sslElement.Properties.Item("controlChannelPolicy").Value = "SslAllow"
   sslElement.Properties.Item("dataChannelPolicy").Value = "SslAllow"
   sslElement.Properties.Item("serverCertHash").Value = "57686f6120447564652c2049495320526f636b73"
Set authenticationElement = securityElement.ChildElements.Item("authentication")
Set anonymousAuthenticationElement = authenticationElement.ChildElements.Item("anonymousAuthentication")
   anonymousAuthenticationElement.Properties.Item("enabled").Value = False
Set basicAuthenticationElement = authenticationElement.ChildElements.Item("basicAuthentication")
   basicAuthenticationElement.Properties.Item("enabled").Value = False
Set clientCertAuthenticationElement = authenticationElement.ChildElements.Item("clientCertAuthentication")
   clientCertAuthenticationElement.Properties.Item("enabled").Value = False
Set sslClientCertificatesElement = securityElement.ChildElements.Item("sslClientCertificates")
   sslClientCertificatesElement.Properties.Item("clientCertificatePolicy").Value = "CertIgnore"
Set customAuthenticationElement = authenticationElement.ChildElements.Item("customAuthentication")
Set providersCollection = customAuthenticationElement.ChildElements.Item("providers").Collection
Set addElement1 = providersCollection.CreateNewElement("add")
   addElement1.Properties.Item("name").Value = "FtpCustomAuthenticationModule"
   addElement1.Properties.Item("enabled").Value = False
   providersCollection.AddElement(addElement1)

' Configure a custom default banner message and local detailed error messages.
Set messagesElement = ftpServerElement.ChildElements.Item("messages")
   messagesElement.Properties.Item("bannerMessage").Value = "Welcome!"
   messagesElement.Properties.Item("allowLocalDetailedErrors").Value = True

' Configure the FTP service to keep partially-uploaded files by default.
Set fileHandlingElement = ftpServerElement.ChildElements.Item("fileHandling")
   fileHandlingElement.Properties.Item("keepPartialUploads").Value = False

' Configure the default external IP address of a firewall.
Set firewallSupportElement = ftpServerElement.ChildElements.Item("firewallSupport")
   firewallSupportElement.Properties.Item("externalIp4Address").Value = "169.254.10.10"

' Specify no user isolation by default.
Set userIsolationElement = ftpServerElement.ChildElements.Item("userIsolation")
   userIsolationElement.Properties.Item("mode").Value = "None"

' Configure UNIX-style directory listings by default and display the available drive space.
Set directoryBrowseElement = ftpServerElement.ChildElements.Item("directoryBrowse")
   directoryBrowseElement.Properties.Item("showFlags").Value = "StyleUnix, DisplayAvailableBytes"

' Enable logging by default with daily log file rollover.
Set logFileElement = ftpServerElement.ChildElements.Item("logFile")
   logFileElement.Properties.Item("period").Value = "Daily"
   logFileElement.Properties.Item("enabled").Value = True

adminManager.CommitChanges()